Lo Voltage Switch

How to Order | Automotive Menu

Overview

This product was originally designed to replace the Norton Commando 'warning light simulator', where it could use the standard Lucas 'idiot' warning lamp. The state-of-the-art encapsulated device can be readily used in many other automotive application and battery warning applications.

Operation

The lamp will illuminate when the ignition is on and will extinguish when the engine has started and the battery voltage rises.
This device will drive a standard automotive instrument lamp (up to 3W). The potted construction is vibration resistant and designed to be electrically robust. The nominal switching point is set at 12.5V, with about 250mV of hysteresis built-in to provide positive switching.

Connections

Alternative Versions

A number of alternative versions of the LVS have be produced for special applications. If you have an application which requires a modification to the standard product please get in touch, email engineering@NanoControls.co.uk. Some modifications can be done at very little extra cost and we don't require large quantities to make it worthwhile.

Example of current 'modified' versions:

• Increased hysterisis, lamp goes out only once the battery is fully on charge (13.8V) but will not come on again until the battery voltage falls to 12.5V [Part: 95306-2]

How to order a LVS

The LVS is available from:
"Classic Motorcycle" electrics specialist AO Services - Tel: +44 (0)1953-884681.

Automotive Menu